Pennywise

5 hours ago, Grease Monkey said:

https://industrialmotoring.com/

Did my truck and will be doing my next truck.  Not one issue with their workmanship or the Cognito components in the last 5 years of owning my truck.

I went there after @dbart recommended them on here in the past.

This is my buddies shop, talk to Greg they do the best work.

45 minutes ago, tjZ06 said:

30' is the max, bumper pull only? 

 

-TJ
 

No he could do 5er but he is towing with a 2500 so it can't be too big

5 hours ago, Poule43 said:

Front Bedroom OR Front Bath ????

Front bath #1 but depending on the floor plan a front bed could work too

My son is looking for a 26-30 foot toy box trailer. He needs minimum of 13' storage. Let me know if you have anything.

Alex

714-420-4331

I have some stuff that's in good shape I pulled out of a boat I just bought, free to anyone that wants to come get it. 

Best to text me 714-420-4331

Alex 

Where in UT? I’m going to be going in a few weeks. 

8 hours ago, Ocotillo Boy said:

Alex Pennywise just did my garage’s. Came out great! I can’t seem to find a photo of the small garage.

Thanks Bryan, I know it was a PIA to get my guys there but I hope it was worth the wait. Sorry dbart, I wasn't able to get you any pricing we are just stupid busy. Looks like they did a nice job. Those cabinets look like they are from one of the suppliers we use, Pacific Panel.  

I have a brand new in the crate factory short block, if interested message me an offer. 

Congrats on finding one.  I'm still looking for one to buy or borrow so I can copy the chassis. . 

Copied below is the description from FB. I bought this truck from a good friend that bought it new. It has a lot of miles but is super clean and really well maintained. I paid way too much for it and only bought it because my new Superduty was taking forever to get to the dealer. I just recently had a full service done, every filter and fluid was changed. I'm open to trades + cash, trades and I'll add cash. I'm always looking for sand cars, trailers, boats, jeeps and would consider a sxs. I dropped the price to $24K and would take $20K in green money. I paid $30K and put new wheels and tires on it so I'm taking a bath for sure on this one. For $20K it a lot of truck. 

2005 Silverado 2500 HD *DANA SOLID AXLE Crew Cab 4wd 6' bed LS *TRADES Welcome This truck is a one owner truck, it has been meticulously maintained and highly modified with the best of best parts and all professionally installed. Super clean interior, no kids, no pets no smells, no tears.

The truck is 18 years old with a average yearly mileage of 16,777 miles with over $70K invested. ~302k miles, ~50K miles on transfer case, trans, and Dana Solid Axle -

Speed House Hybrid Long Travel Solid Axle, True 4 link, approx 3 in over stock height -

79 Kingpin D60 (aka SnoFighter), chromoly axles, REID knuckles, OEM Dana 3.73 gears, Yukon Hardcore hubs, Speed House Dmax brake conversion and ABS conversion - Front: 12-inch travel internal bypass King coilovers, Dual rate coils - Rear: 12-inch travel internal bypass King shocks - Deaver soft ride rear leafs - Speed House long travel shackles - Speed House NV273 transfer case conversion - Custom front and rear driveshafts by Drivelines Inc. - Ported PSC steering box, with ram assist - ATS Stage 5 Transmission with deep pan - ATS 5 star Billet Converter - PPE Xcelerator - Hand-ported AFE - AFE Momentum air box - AFE hot and cold side charge pipes - BD driver side manifold - Magnaflow mandrel bent downpipe - Banks Exhaust - Method wheels - BFG A/T 37s - Linex in bed - Clarion Xcelon DVD / Navigation - Polk Speakers

5 hours ago, URCLEVER said:

Have you driven it and ran through the shakedown yet? Need a ride report...

Yes it's perfect, made a few minor shock and air bag pressure adjustments and if was good to go. Waiting on the Gator Step floors and taking it back to the Header guy to add a resonator/muffler or some sort (it's a little on the loud side). This one got a little out of control on the costs but it's done so right and is all brand new. 

8 hours ago, DZRTRUN said:

I am going to leave it alone. That 2d owes me nothing. If I could find a Fortin 4 speed sequential I would consider it because it’s an easy direct swap. I would keep the 930’s with the Fortin stars and cages. That would keep the balance of the car the same and not chop it up. If I don’t  find one before the 2d gets back I will just throw it back in and run it until I decide to upgrade to another Gen 6. 

If I had to do it over I’d of left mine alone. I ended up $160k into this car. New S4, shifter, aluminum, trailing arms, new hubs, CV’s, Axles, tons of fab work, re-wire, re-plumb, on & on & on. It’s crazy how fast all these new parts add up. 

 

It’s super easy  here are some pics from mine. We went a little over the top but it’s a solid conversion. 

https://motostarz.com/products/custom-led-blinker-genie-pair

On 12/30/2023 at 7:08 PM, Pennywise said:

I have 2 cars for sale: 

Gen 4 G52 conversion all new S4 with LS2 stroked to 416 $135k 

SU 2-seat mid engine, LS2 Kenny Bell blower, Albins, new 12.50’s & 36” paddles, Boxed front arms and Fortin Rack $95k (might have a buyer already on this one). 

The SU is SOLD I'm ready to make a deal on the Funco

SOLD

Used set of Douglas bead locks & 10.75x15 tires good shape

I have 2 cars for sale: 

Gen 4 G52 conversion all new S4 with LS2 stroked to 416 $135k 

SU 2-seat mid engine, LS2 Kenny Bell blower, Albins, new 12.50’s & 36” paddles, Boxed front arms and Fortin Rack $95k (might have a buyer already on this one). 

15 hours ago, dbart said:

@Pennywise Maybe we can talk????

 

Yes call or text me 714-420-4331

5 hours ago, URCLEVER said:

did you do the shake down yet?

This weekend

I know a guy with one, maybe 2 😂

Looking for some good 33x15 or a set of 33x17 with wheels 

Alex 714-420-4331

18 hours ago, K73 said:

Was the wilwood a direct replacement?

No, we had to make a new mount. 

Jamar is probably going to be the closest to what you have.
 

I did tilton pedals and a Willwood turn brake in mine. 

I have a new 2005-2013 YFZ450 IMS 3.8gl tank that never got used and the bike was sold $150

https://imsproducts.com/products/ims-fuel-tank-27316?rq=mk_yamaha~md_yfz450~yr_2006