Grease Monkey

4 minutes ago, Jtmoney714 said:

Not saying this is your issue but I had a similar problem once. Guy at Kartek gave me power steering fluid instead of brake fluid once. I didn’t realize it until after I had the brakes all bled. I drained it and blew everything out and used brake fluid. First trip out cruising around about 20 minutes into driving the brakes locked up. I cracked a bleeder and hot fluid sprayed and smoked its way out. Drove with no brakes for the rest of that weekend. Fast forward to next season I flushed and bled the brakes again. Every so often I would walk in the garage and see the brake lights would be on.  Usually on a hot day. But they never locked up on their own again. Moral of the story is weird stuff happens with brakes if the wrong fluid is used. 

Yeah, had that discussion with Grey Area, the manufacturer.  They have been great to deal with even though I had a leak due to a pinched o ring on their assembly. They sent me a seal kit over the holiday week so I could work on this and have parts on hand.  I have  a caliper off and apart. No swollen o rings or issues there.  I will pop out the pistons while is off and give it a good check over.

They recommend DOT 4 fluid only.

All right. Going to bring this thread up to speed. Had some issues and posted in the transaxle thread. Sean at weddle was a great help and has led me into a different direction. Initially I thought I was having a transmission problem and it was stuck in a couple of gears. While I haven't ruled this out yet, I am digging into the brakes and finding some issues that I'm not certain are really causing the problem.

For those that haven't been following in the other thread, my car locks up at a hard stop and can't roll again for another hour and a half to 2 hours. I've bled all the breaks bled the master cylinders in the car will still not roll. It acts like it's line locked and won't move like there's an anchor out and the car is just stuck to the ground..

The cars at the shop now. I remove the caliper removed the brake pads. Have some good scoring on the brake pads in a little bit of wear on the calipers but nothing major. Going to mill the pads flat again. Make them true so I get a good smooth flat surface against the rotors. Next step is to put the pads back together. Keep the car on jack stands, put it in gear and let it run for a while and ride the brakes. Put some heat in the brake pads. Put some heat in that area and see if I can replicate this on jack stands. Tomorrow. I'm going to drop this kid plate, drain the fluid from the transmission and see if I've got anything on the magnet.

Here's some photos of the brake pads and rotors as they were removed.

I've got about six trips on this setup. All of it as new 2 years ago.

I have a few but IMO this one goes to PASTOR.

RIP VOR

Need to chat and need some help. 

Be on the lookout for Can Am Defenders. 

Friend had 12 basically brand new ones stolen from a storage yard. 

PM me for more details. 

@Twin Turbo Tommy

Back to normal.  May have to adjust head count to stay profitable and will absolutely need to be spot on with quotes and timelines. 

Customers are shopping again and it's not any less expensive to run a business in California.

Remember, it's not the cost per hour the customer should be concerned about,  it's the efficiency of the person doing the job that counts. 

No photos. Didn't expect things to end this way.

Decided to bbq up some rib eyes we got from Rameys last trip. 

Got to say, the best hands down, hands up, prepared or made at home rib eyes we've ever had . And I mean ever. 

Been reading for years about Rameys.  

I'm sold. Hope to repeat this experience again and again. 

My luck, it was just that cow but I'm going back. 

Merry Christmas y'all.

Merry Christmas Slapster.

My present is in the mailbox at the shop. Grey area sent me a full set of caliper seals and o rings . 

Hope this fixes me sandrail issues. 

@Bobalos

@ElCaminoManT

I've used OK Tire in Brawley.  Give them a call in the morning. 

ADP

Paychex can eff off.

Mac

Pad 2 was fairly cleared out by noon yesterday.

@Tonyd

mikeswiretech on IG did my car

Brought the car home for a health check.  Dropped of at Outfront. 

All good to go.

And picked up a few ponies.

First pull at setting 3 on my integral AEM boost controller.

Second pull on setting 4.

obviously not to smart to pm a a moderator

New member  hyuuuttr645 is a Scammer.  Just sent me a PM to contact him about tires for sale from his buddy.   Been on the site for 2 minuets........

Banned from the site and please, always be careful who you deal with on any buy and sell dealings.

18 hours ago, DZRTRUN said:

My favorites.

Do you miss the Hustler?

Are you looking for the exact same to replace or to upgrade to something more modern looking?

Guess I'm a duner. Wtf is OF?