Sandcar / Off-Road Parts
412 topics in this forum
-
- 3 replies
- 377 views
Getting rid of 2 Heat Exchangers/Oil Cooler. The bigger one is a custom made exchanger that CBR added a fan shroud and fans. Spall 8" fans, pullers. Dimensions are in the pix. Selling this one for $275. Smaller one is CBR Part Number 2827. It is classified as an oil cooler, I used it with Antifreeze as a heat exchanger. The fan is a pusher. $175 for this one. Call or text. 480-231-6386. Located in East Mesa (Phoenix)
Last reply by lincster, -
- 2 replies
- 513 views
17” DWT wheels with OMF scalloped beadlock rings - also have inner reinforcing rings as well. 3” offset. Front have 10.50x17 STU Razor backs - good shape Rears have 33x17 STU Sand Blasters - useable however pretty used up… $2300.00 OBO Located in San Diego 619.756.5913 / Barry
Last reply by ROBERT L, -
- 0 replies
- 368 views
Very well built, very fast - Ford Ecoboost with big turbo. Approximately 640WHP - engine flat out gets it - currently in a SCU pro bro - paired up to a PBS sequential - engine is coming out next week - engine is awesome however we are doing a big LS build changing it up. No known issues / your welcome to check it out. If your looking for an engine to keep up with the big boys and is scary fast and a bit unique then this is it. One of only a few that SCU did from what I understand. This engine is very cool/sounds great as well. Don’t need to sell however will make a fellow duner a very good deal and don’t need it sitting around on an engine stand - too nice for that…
Last reply by Bronco1, -
- 3 replies
- 494 views
I have a set of 17" - 3" back spacing Douglas bead lock wheels. Rings and all hardware included. One of the wheels has a couple weld repairs on the inside of the wheel. I purchased new wheels, and these are just sitting around BEST OFFFER.
Last reply by SANDFORME, -
- 1 follower
- 2 replies
- 279 views
Chrome valves for an LS3 They are in good condition I just switched them out to black $50 In San Diego but can bring them to Irvine area if that helps.
Last reply by SANDFORME, -
- 2 replies
- 292 views
I have a 220 watt electric steering unit that came out of my 4 seat buggy for sale. It has worked great with zero issues. The car it came off of had 10.75 front sand tires and it steered them with ease. It is the assist motor, control unit and wire harness. Originally purchased from Pacific Customs for $625, I likely still have the receipt if I looked for it. I'm in Goodyear, Az. I'm asking $300
Last reply by Halestorm, -
- 1 reply
- 205 views
These came out of my buggy. The front covers are worn but the rears are decent. I have 1 brand new oem seat cover I will include, it just needs to be installed. I believe EMPI still sells the covers. I also have a set of 4 Crow harnesses, they are the padded 4" with single upper attachment behind the seat, anti-submarine crotch buckles also. Harnesses are in great shape, no freying or tears. I will not sell individually, as a set only. I am in Goodyear, Az. $400
Last reply by KLC, -
.thumb.jpg.ea30f9e7bed9eb2f3916db22d93f51bb.jpg)
- 2 replies
- 357 views
I have a set of Locked Bumpstops 2" by 4" only no cans asking $250.00 OBO have never been ran used for mock up. I have a new gm water pump never been used part number 18-1921 no gaskets $75.00 obo I have a set of centerling bolt together beadlock wheels with extreme eliminator paddles 15 x 14 3 1/2 backspacing. The Paddles are from o7 no cracks selling asking $500.00 obo Call or text 760-953-3572 Barstow CA 92311 or Pahrump Nv 89048
Last reply by DDBRATT, -
- 3 replies
- 554 views
Hi For sale 2 BTR 15x10 2 1/2 backspacing/powder coated Black with White rings and a set of STU 33 x 15 pro #2 cut paddles with 5 trips on them this past season no punctures tires stay aired up, Also a set of 15x4.5 1 3/4 backspacing BTRS Powder coated black with White rings. Asking $2200.00 obo send me a text or call 760-953-3572 I am in the 93211 Barstow CA area and Pahrump Nv 89048. .
Last reply by DDBRATT, -
- 5 replies
- 784 views
Motor came from a salvage yard and is claimed to have 120K on it. It is the cleanest one I have ever got a hold of. It has the factory engine wire harness as well. At this point, stock condition, I can see it needs 3 sensors that got broken at some point. Price is $350.00. This price will change as time goes on and the motor is set up for a sand car. This will happen later in summer.
Last reply by ROBERT L, -
- 2 replies
- 493 views
For Sale - S4 drive flanges for 934 CV's 12mm threads. I removed these to match all of my CV's and have 1/2" bolts in everything. In great shape ready to use. Including 5 good bolts $300 for the pair Located in Torrance, CA will ship on your dime Mike (three one zero) three four four-2115
Last reply by Mike E, -
- 1 reply
- 361 views
For Sale - 11" x 11" plate cooler for transmission or oil. Has 9" electric fan and 1/2" NPT ports Was used as a trans cooler for an S4 but removed and now I just pump the fluid and don't run it through the cooler. Located in Torrance, CA would prefer not to ship this one $100 (AN caps not included) Mike (three one zero) three four four-2115
Last reply by Mike E, -
- 1 reply
- 405 views
I have 2 (or 3) Bosch p/n 0580254982 Fuel Pumps for sale (I have a 3rd in the trailer but can't confirm the p/n at the moment) In working order with -6 AN fitting on the outlet $60 each or both for $100 ($150 for all 3) Located in Torrance, CA but ship it on your dime. Mike (three one zero) three four four-2115
Last reply by Mike E, -
- 4 replies
- 848 views
MEFI-4 with harness and Delphi injectors for LS1. Was removed from a running car as we moved to Holley HP and bigger injectors. Injectors should probably be serviced/cleaned. 8 injectors Delphi p/n 8142A17113739 (42lb marine injectors) I also have a couple Bosch Fuel pumps for sale listed in another ad. $1000 obo Located in Torrance, CA. I can ship it on your dime. Mike (three one zero) three four four-2115
Last reply by Mike E, -
- 4 replies
- 1.3k views
Fortin 4 speed wide gear for sale. H pattern, 934 Flanges, blind hole so tranny fluid doesn't come out when CV is removed. 3.88 R&P 1st: 2.77 2nd: 1.93 3rd: 1.75 4th: 1.33 Currently at Kevin McMullens to go through. Has newer style Hewland R&P which is bigger than older style. Very close swap to a 2D. I'm including 2 Fortin shifters, with lockout. I have a spare R&P that McMullen has blessed as good. Spare 2nd gear. I have my old shift shaft, may need length adjusted, but includes all U-joints needed. $14000 obo. Call or text, 480-231-6386. Call Kevin also with questions, 602-402-6215
Last reply by lincster, -
- 0 replies
- 513 views
8’ OG buggy whips with mounting brackets qty 2 lacarra steering wheel off funco im in riverside text me 714-458-6020
Last reply by CHRIS J, -
- 1 reply
- 884 views
Funco Gen 4 Trailing Arms and complete 930 midboard hubs and brakes, comes with axles and inner Cvs, NO BAGS OR BAG MOUNTS, $2800 OBO Jonathan 951-520-3002
Last reply by RPMsRUP, -
- 4 replies
- 535 views
Mefi 4B with harness for LS was on a LS2 tuned by CBM harness is in perfect shape, going to Holley setup, $1000 Jonathan 951-520-3002
Last reply by Jush, -
.thumb.jpg.8be318c82eeb3fbc3305e187c8ac13d4.jpg)
- 1 follower
- 0 replies
- 530 views
Tires are older and usable. No holes or patches. $750 for the pair Located in Kansas. Could bring them to Little Sahara Oklahoma in April or St. Anthony's Idaho in June or Glamis in December 2023.
Last reply by GeneralG, -
- 1 follower
- 2 replies
- 1k views
Mendeola MD4S E. Just picked up from rebuild, new ring and pinion, new 3rd gear, new bearings, seals etc… Dons Bus box did the work I have the paperwork. I put a turbo on the Honda and went to a 2D. This thing was always solid. Geared to dune in 3rd gear on sand sport 14.50-15 tires. 930 flanges. gearing: 5.14rp 3.44, 2.25, 1.71, 1.14 text or call 9165845513 thanks
Last reply by mc22, -
- 1 follower
- 2 replies
- 657 views
LS3 Redline Performance Harness & AEM Infinity Computer. Computer has a danzio LS3 tune on it. Only removed because we changed to a Life Racing computer. It is in perfect condition and includes everything you need to run your ls motor.
Last reply by Reece Pettersen, -
- 1 follower
- 2 replies
- 503 views
I bought a new (sat on a shelf for years) set of King 2.5x14 triple bypasses for my car and turns out I need 16s. I would trade for a set of 16s or sell these for $1500. Located in Michigan but will ship on your dime. These have never been ran, 37.25" eye to eye extended.
Last reply by moondog897, -
- 1 reply
- 424 views
PCI Race Radios Intercom $150 Rugged Race radio car to car $200 ICom Radio car to car $200 RzR mounting brackets $25 each All have been tested, powered on and working. You will need power cables with the correct connector on all. Will ship, you pay for shipping. **Rugged intercom has been sold**
Last reply by GeneralG, -
- 2 replies
- 523 views
Douglas 15x5.5 beadlocks perfect shape$300 Jonathan 951-520-3002
Last reply by RPMsRUP, -
- 1 reply
- 370 views
Bought this for my buggy and never installed it. New sxs has a pump so I no longer need it. All brand new. Pumper, weld on mount, original mount(not pictured), a new 6ft hose, new 3 ft hose, and a rubber plug for using it solo. $200 east county San Diego.
Last reply by xtracrispy,
