Sandcar / Off-Road Parts
412 topics in this forum
-
- 1 reply
- 788 views
I bought this to modify and fit my car, going in a different direction, I paid $300 for it would like that out of it $300 obo Jonathan 951-520-3002
Last reply by RPMsRUP, -
- 1 follower
- 3 replies
- 651 views
I have 2 new PCI behind the head headsets and would like to change them to over the head, if anyone wants to switch it up. My daughters do not like the behind the heads. Let me know.
Last reply by URCLEVER, -
- 1 reply
- 516 views
I have a pair of Fox 14" coilover shocks, these are 2" emulsion shocks, 7/8 shaft with no reservoir. The springs are Eibach 350 over 450. These were purchased new in 2014 and have been installed on my V8 sand car since I bought them. They DO NOT leak and are presently filled with Fox oil and charged with nitrogen. The heims are tight and in good shape. 1 of the bodies has more threads than the other but it's never been an issue, I received them that way and never pursued exchanging them. They were just taken out of service in the last month and there is no reason they couldn't be put on a car and used right now. The valving is within a range or two of stock but they've de…
Last reply by KLC, -
- 0 replies
- 424 views
Funco gen 4 dash $30 pack coors light White scoop with air box for LS1 and extra filters $150 Black scoop $100 Jonathan 951-520-3002
Last reply by RPMsRUP, -
- 4 replies
- 788 views
MomoCorse steering wheel 350MM size, leather, Does not include a center cap as I have a gear selector on my car. Only reason selling is I prefer the Suede/ D-shape steering wheels. Asking 150$ OBO (714) 321 0748
Last reply by Banshee380, -
- 3 replies
- 831 views
Dune Sport 14.5-15 #2 paddle Shaved Baja Pro 33” Beauty rings $2600.00 obo Tires are in Great shape no chunks or plugs 951-520-3002
Last reply by RPMsRUP, -
- 3 replies
- 449 views
Like title. Wheels and tires. Tires and in a used condition. No chunks and one will hold air only for about 7 to 8 days before you need to refill. The other holds air. Wheels are in great shape and only need polish if so desired. Also, they are 14mm lug holes. $ 550.00
Last reply by richard h, -
- 8 replies
- 838 views
Last reply by Sandkid, -
- 0 replies
- 259 views
Hi everyone, I am looking for a flywheel, pressure plate, floater and clutches for a Honda J35 engine. let me know if you have one for sale. Thank you, Matthew 562-500-4977
Last reply by JM PRO, -
- 2 replies
- 458 views
Subi 2.5 , 400+ HP, closed deck block, all forged internals, 18 lbs of boost on E85, comes with everything needed to run, motec computer and harness, clutch, scoop to pan, also have a few spare parts to go with $6500 obo Jonathan 951-520-3002
Last reply by RPMsRUP, -
- 3 replies
- 622 views
Sold the buggy a year back and haven’t had time to post these until now. Used them one time otherwise they sat in the trailer or shop. 4 - 15” bead lock wheels with standard VW 5 lug Rears - 33x12.50r15lt Fronts - 7.00-15LT Great tires just no use for them anymore. Will wash them before. No leaks. $1,000 obo
Last reply by Vinsanity, -
- 1 follower
- 4 replies
- 910 views
Have these taking up space in the garage. Starting to crack but always held air. I ran starch anyways and no leaks all season. 15 07 date code. $50 for a board member. Or a bottle of bourbon? Or… make them disappear? in Alpine, CA
Last reply by Spills, -
- 9 replies
- 1.8k views
Thinking about selling my 2004 Funco 2 seat Hustler. Just not using enough. I am the second owner since 2006. 460hp C and G. SOHC Subaru 2.5 with Garrett gt2860, Tial Wastegate,Turbosmart BOV, Hallman boost controller , all Teflon fuel lines a fittings. Roll over vent valve all an vent lines. Engine was opened up and inspected, retuned on the dyno by John at outfront motor sports. 110 fuel. timing belt was done two trips ago along with the tensioner and pulleys. Mendeola 2d with Funco nose cone. 3 trips since rebuild by Rancho. No internal parts needed replacement, all new bearings and seals. Funco did the r and r. 930 …
Last reply by onanysunday, -
- 2 replies
- 445 views
Let me know. I have a tire that cracked inside at the bead and would not hold air. Very weird spot to fail. Thanks
Last reply by onanysunday, -
- 2 replies
- 711 views
Mendeola 2D, 4 speed with 930 flanges. Was in a funco gen4 with turbo subi. The trans was just rebuilt by Rancho with ZERO time on it. 5:14 R&P Grears: 290-208-156-114 $7500 Alex
Last reply by SANDBAM, -
- 4 replies
- 1.2k views
Complete set, no plugs or chunks, great shape. Dune Sport 14.5-17 #2 paddle Shaved Baja Pro 35” Beadlock wheels with inner stiffening ring. Front side GTX Beauty ring is removable. $2800.00 obo Located in AZ Thanks for looking! Cory
Last reply by Coryz71, -
- 2 replies
- 493 views
WTB sand tires unlimited 35.5 17 beadlocks and tires and 12.50 17s wheels and tires Cash in hand or also have a full set of 33 15s with 10.75 15 razors it’s someone wants to trade I can put in cash for difference 909-559-9988
Last reply by Blacktop, -
- 1 follower
- 6 replies
- 1.1k views
I bought these a few years ago as spares for my buggy. they had the aluminum CV Flanges & the flanges were beat up pretty good. I called @parker@gearone @Gear One and he set me up with a new set (they had them sitting on the shelf). I have not done anything to these, I have not even cleaned the grease off of them, just bought the flanges & stuck them in the trailer with the rest of the spares. The bearings & seals are used. some of them are OK, some are junk. the 3 CV's are used out of my buggy. I found one tore up during summer maintenance so I switched all 4 of them to @J Alper CV's in the buggy. They are great for spares. There are …
Last reply by Bobalos, -
- 2 replies
- 797 views
Set of 33x15 Blaster #2 & 10.75x15 fronts with black bead lock Douglas wheels $2800 obo Alex 714-420-4331
Last reply by Pennywise, -
- 1 reply
- 820 views
Have some older Baja Designs 5’’ lights that were on my car when I bought it. Five lights in total 2 were halogen bulb daytime running lights. 3 were HID Includes the mounting bracket and all stainless hardware. Asking 500$ OBO. Call or text me 714 321 0748
Last reply by Banshee380, -
- 5 replies
- 1.1k views
I am selling my Turbo Subaru. It was rebuilt by the previous owner who is a professional engine builder and came out of his sandcar. It comes with the ECU and harness, HKS boost controller, intercooler, intercooler scoop, Outfront Motorsports exhaust and reinforced bottom oil pan. Also comes with a Kennedy Engineered Products engine adapter. Flywheel is for a 228mm clutch. It is a closed deck block, CP pistons, and I think Carriilo rods. Comes with most everything in the pictures (I did not take a picture of the harness). I am keeping the clutch and pressure plate. Ran good when I pulled it out to service the transmission. I am only selling because I am putting an LS …
Last reply by raspadoo, -
- 1 follower
- 13 replies
- 1.9k views
The whole thing for $5k. This includes motor, adapter plate, clutch, fuel pump, turbo, wastegate, exhaust, water reservoir. stock ecu, wire harness, power steering pump, BOV, motor mounts. still in car can, hear run. the customer bought this car and just wants a 600HP Subaru in it We assume this is a stock honda motor We assume it runs on race gas i dont have any HP numbers and its not been on my dyno items not included: intercooler (its in his wing), radiator and overflow bottle will remove motor once a deal is made for no charge
Last reply by John@Outfront, -
- 1 reply
- 510 views
Rear Bogart V-Star 15x12 bead lock, VW bolt pattern. Comes with scallop bead locks. 3 1/2 back space. I also have the fronts wheels 15x4, spindle mount. One is good the other needs to be repaired. The center hub weld gave out. $500 OBO Dave 909-557-7222. Prefer txt msg
Last reply by Davcam24, -
- 5 replies
- 1.4k views
Built May 2022. Built by Rob Smith of Smith Sand Cars Comes with: Fully tabbed LS/2D Iron Block 6.0L - 8K miles on engine. (Needs rebuild as it had an Oil Pump Failure - Engine disassembled) Aluminum Work - Roof, side panels, floor pans, rear wing, Nose Piece Brakes - Front & Rear Cutting brake Steering shaft & Quick Disconnect Steering Wheel Rack and pinion Tie rods Seats (2 front) New Sand Tires Unlimited 33x15 Blasters New Douglas bead lock wheels New Sand Tires Unlimited Front 3 rib 8.50X15 New Douglas bead lock wheels Radiator Fuel tank Clutch and brake pedal assembly Car is built extremely well. $13,500
Last reply by Mark1981, -
- 1 follower
- 6 replies
- 1k views
Proam 2” hollow front hubs, brakes, and snouts. Does not include uprights. Rotors and brake pads have ~100 miles. $2,500
Last reply by Reece Pettersen,
