Sandcar / Off-Road Parts
422 topics in this forum
-
Came out of a Gen 3 Funco Buckets approx 18x14.5 Bench 18x46 $600 obo Call or text Joe 909-841-2063
Last reply by etdust, -
- 2 replies
- 665 views
Selling the Injector’s out of my J series. They are rated at 550 and have been modified to fit the J series 98-03 rails and intake runners. Pig tails are included. Asking 400obo. They only have dyno time on them. Only reason for selling is I went to E85 and needed a bigger injector.
Last reply by ChasingSand, -
- 0 replies
- 971 views
Rear 930 hubs off a Short Sand car. They are 4 lug VW pattern. Sealed bearings were replaced and only used about 5 weekend trips. Could use on small buggy project. Or replacement for SSC. Looking to get $40 OBO. Located in El Cajon
Last reply by Blacklisted, -
- 3 replies
- 1.9k views
Front spindles are gear one I think I didn't write this post correctly originally. I got these parts because someone owed me money. yes I do want to sell these parts, i just don't know their worth. Need some help maybe on what they are worth. Thank you lardass for pointing that out. I was told rears may be tatum mid board hubs which look to be 4 piston calipers. I see what they are new but being that they are used I don’t know the worth. Also have a j25 turbo Subaru with looks to be a stinger setup. Harness turbo and inter cooler. Was trying to get info on it. Guy who Owed me money said it was running and fairly new
Last reply by Fullthrottleguy, -
Almost brand new paddles, 16.50 - 15 on Douglas bead lock wheels no plugs or damage at all, set of two rears. Lug pattern is VW wide 5. Only have rears. $2200 619-993-4072
Last reply by spinyard, -
- 1 reply
- 278 views
Just pulled out of car going to Chevy bell housing was set up on 2d adapter plate is redline Kennedy pressure plate, flywheel and stage 3 disc’s 600.00 for everything obo in riverside ca 714-458-6020
Last reply by CHRIS J, -
- 1 follower
- 1 reply
- 1.3k views
I have a set of 4 Revolution EVO 2.5 shocks for sale. 1 pair are 12" stroke and the other pair are 14" stroke. Shocks are in good shape. I bought them for a project and they never moved off my shelf so looking to get out of them for what I paid. From everything I have read and researched, these shocks are the bomb and I really wanted to use them. There is a guy in Upland that still services these shocks. let me know if you have any questions. $1000.00 Thanks Matthew 562-500-4977
Last reply by ERS, -
- 1 follower
- 0 replies
- 312 views
Parts For Sale space saver rollers 15x4 wheel 3 in back space . Will clear 4 piston calipers . You’d hub cover will stick out farther than tire wheel . 22 inch tall T125/75-15 $125 Howe Power Steering Reservoir $100 Crow red lap belts (pair) $40 Pro Am 930 33spline 300m mid board stubs . $225 Can bring to Glamis Nov 12-22 Otherwise located in Northern Ca
Last reply by chopshop, -
- 4 replies
- 284 views
For Sale - Roof Rack built from 1" round tube 51" long 42" wide with a 40" light bar on the front. Mounts are spaced 47 1/2" front to back and 38 1/4" side to side. $100 Changed some things on the car and I'll build a new one to fit those changes. Contact Mike (310) three four four-2115 or message me through the site Located in Torrance, CA Sorry, I don't know how to rotate the pictures.
Last reply by Mike E, -
- 1 reply
- 889 views
These were made by RPM. They are stainless and ceramic coated black. Includes tail pipes. located in corona 92880 price $700
Last reply by Schnitzel, -
- 0 replies
- 901 views
Selling 1 Rugged Radios Alpha Bass headset that was only used twice. Excellent condition $ 230 Also have 2 Crow harnesses, they are 2" and do not come with the submarine belt $40 each Located in nor cal and will ship on buyers dime
Last reply by HydroPower, -
- 1 reply
- 430 views
PCI Race Radios Intercom $150 Rugged Race radio car to car $200 ICom Radio car to car $200 RzR mounting brackets $25 each All have been tested, powered on and working. You will need power cables with the correct connector on all. Will ship, you pay for shipping. **Rugged intercom has been sold**
Last reply by GeneralG, -
- 0 replies
- 562 views
Comes complete with all wires. It's a extra one I got. Sold
Last reply by Jhuerta, -
- 2 replies
- 509 views
For Sale - S4 drive flanges for 934 CV's 12mm threads. I removed these to match all of my CV's and have 1/2" bolts in everything. In great shape ready to use. Including 5 good bolts $300 for the pair Located in Torrance, CA will ship on your dime Mike (three one zero) three four four-2115
Last reply by Mike E, -
- 2 replies
- 1.4k views
Selling my S4 that was built by Kevin McMullen racing /transaxles Trans was originally built inJanuary of 2020 when the shift housing and all outdated parts were updated . I ran it for the season then in January of 2021 the main case developed a hairline crack It was sent back to McMullen for a new main case and freshen anything (if needed ) I received it back July of 2021 . I put the trans back in the car for 1 trip to Idaho while waiting for my new s4d to arrive . Trans was broken in exactly as directed my mucmullen . New s4d arrived last week so this one is for sale I have all the paperwork and build sheets from McMullen. Trans is bas…
Last reply by gbracer, -
I know it's a long shot but throwing it out there. I'm looking for the possibility of tracking down an S4D transaxle preferably new. Anything out there let me know. I am aware of the shortage. I have 2 still that I've been waiting for since June. Right now I have a customer that really needs one and would like to have one more trip this season.
Last reply by Pennywise, -
- 1 reply
- 1.2k views
Long shot… my son is in need of an S4D ring/pinion If you might know of one please advise thanks
Last reply by PICKUPYOURTRASH, -
- 6 replies
- 1.2k views
Started this Sand Bullet build for my son but want to move in a different direction. Turboed CBR 1100 Engine Lots of extras and accessories. Let me know if you have any questions. Needs finished, powder coat, some fab/welding, etc. $7000
Last reply by Duner19, -
- 8 replies
- 5.1k views
What's it worth? This is all I got back from my stolen sandrail. I had intentions of bringing her back to life but, life happened. Fully tabbed Sandbuggy Supply, dual purpose frame, originally setup with a twin turbo Northstar, 2D Medi, bypass shocks all four corners. Missing rear cage. Tanx
Last reply by Ron gray, -
- 2 replies
- 393 views
8.50 x 15 Front Tires ~ Good Condition Located in Menifee Text 951-316-8793 First pic is not the actual tire
Last reply by Mark1981, -
- 1 reply
- 284 views
Sand Tires Unlimited 10.50 razors for sale. No rips, tears, cracking or chunks missing. Located in San Diego $375.00
Last reply by Tonyd, -
- 1 follower
- 3 replies
- 1.1k views
Upgraded to a larger tire is the only reason for removal. These held air for the last 4 trips. Some signs of wear and minor seepage. $350 located in Lake Havasu or can bring to the dunes.
Last reply by Axion, -
- 0 replies
- 1.1k views
2- used in great shape. Tires only, no wheels. $300 714 931-7302
Last reply by KeithS, -
- 0 replies
- 305 views
Posting for a friend please call or text Jay at 602-828-2484 I have 930 Gear One mid board hubs minus the calipers and mounting plate as i switched to 934 hubs. I have my Tatum front combo brake kit went to 2" hollows. Also have Tatum 300m 930 36" long axels clip to clip. Also have extra cvs in the pile along with RCV cvs inside the midvoard hubs. Selling lot for $2500 less than half off everything new. Can also Separate. Text for questions.
Last reply by Forumfsq, -
- 1 follower
- 9 replies
- 1.8k views
Aeromotive fuel rails- 150$ Stock ls3 intake w/ 92mm throttle body- 300$ Rugged Vertex radio- 100$ Ls coil covers- 20$ Cnc pedals w’ 3/4 and 7/8 master- 100$ cnc turning brakes-50$ 2 rugged head sets-150$ for the pair gear one king king hubs w/brakes- 400$ not pictured.
Last reply by HTElectrical,