Sandcar / Off-Road Parts
419 topics in this forum
-
- 2 replies
- 1.6k views
These came out of my hustler. They are plus 1 wide and are the high containment style. Open lap belt cut away. I had new seat heaters installed last season and never hooked them up. Also has lumbar support knob on each. Head rests are adjustable up/down. Frames and padding are good. Slight tear on the back of the passenger seat where it rubbed the frame bar. Seats are in above average condition and should provide years of use. $800.00 for the pair. Located in Costa Mesa CA
Last reply by Grease Monkey, -
- 1 follower
- 2 replies
- 1.1k views
Mendeola MD4S E. Just picked up from rebuild, new ring and pinion, new 3rd gear, new bearings, seals etc… Dons Bus box did the work I have the paperwork. I put a turbo on the Honda and went to a 2D. This thing was always solid. Geared to dune in 3rd gear on sand sport 14.50-15 tires. 930 flanges. gearing: 5.14rp 3.44, 2.25, 1.71, 1.14 text or call 9165845513 thanks
Last reply by mc22, -
- 2 replies
- 163 views
Anyone have a VX-2200 hanging around they Wang to let go of? It’s for my little guys 570 and the stuff I have to put it in was build for that radio.
Last reply by Tonyd, -
- 1 follower
- 2 replies
- 779 views
4 Jet Trim bucket seats $200 obo
Last reply by Squatcher, -
- 2 replies
- 1.4k views
Selling my S4 that was built by Kevin McMullen racing /transaxles Trans was originally built inJanuary of 2020 when the shift housing and all outdated parts were updated . I ran it for the season then in January of 2021 the main case developed a hairline crack It was sent back to McMullen for a new main case and freshen anything (if needed ) I received it back July of 2021 . I put the trans back in the car for 1 trip to Idaho while waiting for my new s4d to arrive . Trans was broken in exactly as directed my mucmullen . New s4d arrived last week so this one is for sale I have all the paperwork and build sheets from McMullen. Trans is bas…
Last reply by gbracer, -
- 1 follower
- 2 replies
- 886 views
Selling a set of matched special and staggered perfect BTRs. Have goodyears with 25% or so left on them. One tire is toast, came apart on the dyno. $900 obo
Last reply by Goatpoker, -
- 2 replies
- 307 views
I have a pair of used extreme paddles. 35” and they are number 2 cut. Both hold air with no tubes but one paddle I did have to put a small tire plug in. asking $300 for the set.
Last reply by Greg Rakes, -
- 2 replies
- 1.4k views
Pair of Dune Sport 14.50x15 #2 cut on Douglas beadlock wheels, 3.5” backspace. I believe they were originally from a Gen3 Funco. Bought last year from a GD member but they are too much tire for my car. Good condition, hold air pretty well, no big chunks gone. Over 1” of paddle left. $600 OBO. Located in East San Diego county.
Last reply by mike b, -
- 1 follower
- 2 replies
- 1.1k views
I have a MEFI 4a with a LS1 harness and mefiburn software. The connectors for the camshaft sensor and knock sensors have been extended for external knock sensor locate and LS2 front camshaft sensor conversion. Came off a running supercharged LS1 383. Converting to E-85 and changing control systems. Message or text me if you need more info. $600 OBO. Text 970-270-7742
Last reply by chevyman500, -
Wheels are sold Like new is a complete set of 17" beadlock wheels for a sandcar/ dune buggy. Wheels are Champion brand, Wakelock rings. These wheels are powder coated black. No damages, or imperfections, very little use on them. Rather than powder coat these a different color I would entertain trading for a set of DWT / Douglas 17" beadlock wheels. Located in Kansas
Last reply by GeneralG, -
- 2 replies
- 492 views
I have a set of 934 drive flanges that came in a 2D I recently bought. I’d like to trade them for 930’s. I am currently swapping from ebox to a 2d. I’m going to swap the e-box 930 flanges to the 2D for my car for now and then sell the ebox. I don’t think anyone that would want it would need 934’s! md4s-e for sale soon! text 916-584-5513. Located in PHX. thanks
Last reply by mc22, -
Last reply by BoydCo,
-
- 2 replies
- 1.2k views
Help the Glamis Vet's auction! Might get it for half off!! https://glamisvetsauction.asimobile.net/#/view/19149
Last reply by Kraut_n_Rice, -
- 2 replies
- 1.3k views
Funco Dash W / Gauges & Garmim GPS & Box of Wiring $SOLD$ K&N Filter off LS $40 LazerStar 14" Light Bars $60 Chevy LS McLeod RXT Double Disk Clutch & Flywheel, 100% complete & working perfectly. $550 Funco LS7 hard radiator lines. $40 All items located in Redlands Ca. 92374 TEXT Only Please 9o95576o68
Last reply by PICKUPYOURTRASH, -
- 1 follower
- 2 replies
- 289 views
Chrome valves for an LS3 They are in good condition I just switched them out to black $50 In San Diego but can bring them to Irvine area if that helps.
Last reply by SANDFORME, -
- 2 replies
- 2.2k views
Going turbo so putting my HotHead headers up for sale. Black painted on main pipe with chrome mufflers. Small dent on passenger side tip of muffler. Only used for a season and a half. Going turbo so I will have no use for them.
Last reply by ChasingSand, -
- 2 replies
- 728 views
Have a complete set of Sand Tires Unlimited paddles plus extra rear paddle. (2) STU front razor backs 10.50-17, and (3) STU rear Sand Blaster I 33-17 paddles. In good condition. $400
Last reply by CC239badlands, -
- 2 replies
- 441 views
Rear tires - BFG projects - 35x12.50x15 Front tires- Baja Pros - 35.0/10.0/15 No longer need these, used as rollers for sand anyone have a use? not sure what a fair price is - Start at $1,600 OBO ? Located in St. George Utah.
Last reply by FOG, -
- 2 replies
- 539 views
17” DWT wheels with OMF scalloped beadlock rings - also have inner reinforcing rings as well. 3” offset. Front have 10.50x17 STU Razor backs - good shape Rears have 33x17 STU Sand Blasters - useable however pretty used up… $2300.00 OBO Located in San Diego 619.756.5913 / Barry
Last reply by ROBERT L, -
- 1 follower
- 1 reply
- 651 views
View Advert McLeod RXT twin disc clutch for sale Used but in good shape, asking $550 for complete set up. These are $1500 new. Will ship on your dime Advertiser SCUMAN Date 07/29/2021 Price $550.00 Category Sandcar / Off-Road parts
Last reply by Squatcher, -
- 1 follower
- 1 reply
- 705 views
Came out of my Funco Hustler. Worked with my S4 transaxle. No issues. $250.00 obo.
Last reply by Grease Monkey, -
- 1 follower
- 1 reply
- 2k views
Good used set of shocks with bypass tubes. Bags have cracking but hold air. Was told to run em as is and did. Anodizing has a blue tint to it. Not sure if it's faded black or they were done in a dark blue. See photos. No history on any previous service. No oil leaks. Updating the car so these are for sale. Rear bypass shafts measure a tad over 15inches. I believe these are sold as 14 inch bypass shocks. Prefer to sell as a complete set. $2500.00 obo.
Last reply by Grease Monkey, -
- 1 reply
- 180 views
Seeing if anyone has a complete set of wheels and tires. Prefer a 33 blaster with a number 2 cut and 10.75 fronts. Powder coated black is a huge plus. Text me 909-229-1874 thank you!
Last reply by ChasingSand, -
- 1 reply
- 553 views
Asking 15.5k (below is link for details along with my info) Jeep Wrangler
Last reply by realtreeHD, -
- 1 reply
- 257 views
New old stock. Will be perfect with a washing. $100.00. Brian 661-619-1622
Last reply by Funco 4,