Funco Motorsports
83 topics in this forum
-
- 3 followers
- 39 replies
- 10.4k views
As I have been sitting here looking and waiting. What are the different models of Funco's? Obviously they had they old school bus looking one (Gen1) then gen 2, gen 3, then Gen 4, Gen 5, Gen 6, Hustler(s), GTU, GTX, GTF, Enzo, the F9 and I am sure there are others, but what makes each of those that model. What are the differences?
Last reply by URCLEVER, -
- 8 replies
- 1.1k views
I searched and didn't find anything. Just wondering what pressures you guys run in your bags- I recently added onboard air and made some changes to where the motor and trans was mounted. Taking it out this weekend for the first time since the changes which got me thinking- what pressures do you all run and what is your set up? Also looking for input on dialing in the rebound and compression settings. I plan on giving Grant a call to get his input but just wanted to check on here as well. I have a gen 4 Funco, S4, LS3 with LSA Supercharger
Last reply by Willinetics, -
- 1 follower
- 4 replies
- 1.4k views
We are just trying to come for air after a great Regatta event so I thought I would post up some pictures. First want to thank all the Customers that braved the insanely sketchy weather and coming out. I'm guessing we must be right with the Sand Goods, the weather cooperated just enough to get the organized events off. Need to thank some people : BLM for working with us for close to a year to pull of a fully permitted GECKO ROAD event Our partners /suppliers for fully supporting us with great giveaways @funco4lizzleand family for always stepping up and doing the Ladies Run Champagne stop Our Funco Family Dune/Camp group...always there for…
Last reply by funco4lizzle, -
- 1 reply
- 411 views
Looking for a GEN four or better with an LS motor or potentially a 35 Honda? PM me with details personally please and thank you could also feel free to call or text. 760-889-3099
Last reply by Therealjlt, -
- 5 replies
- 968 views
Funco hats for sale Will be at Pad 5 all week $20 bucks Terry 626 475 6756
Last reply by kgwmu, -
- 3 followers
- 66 replies
- 5.7k views
Well I thought I would take the season off from having a funco but the kool aid was just to good so I started another gen 4 conversion, but with all the hype that a subi gen 4 would be a faster dunner then any LS funco I have had I figured why not giving it a try this time around hoping to have it finished by mlk weekend
Last reply by PICKUPYOURTRASH, -
- 1 follower
- 1 reply
- 384 views
Hey guys, Went to do my routine check through my car before my next trip and noticed a few things needing attention... One of which is my Steering rack is starting to leak. From my understanding its from a Ford Mustang, but the markings on it are not matching any part numbers for the auto parts stores... Would anyone know the part number? Hoping to have this and a few things done in time for the Regatta. Thanks in advance for any help
Last reply by Arch Stanton, -
- 0 replies
- 348 views
Just an FYI!!!
Last reply by dunenfool, -
- 0 replies
- 618 views
If your going to be participating in the group photo and want to be parked with your group for the photo please do not go down to the staging area without your group. I would ask that you all leave the registration area as a group, head to the top of the ridge and you will be sent down together. Follow the flagger instructions. we will be at the top and bottom of the site.
Last reply by funco4lizzle, -
- 3 followers
- 21 replies
- 2.5k views
Agains most sane peoples advice I decided to tackle this project. The game plan is to swap the Suspension from Gen 3 geometry to Gen 4. Install S4 & Alper 416. Picked up round one parts: New king 3.0 shocks New billet upper A-arms New tube lower A-arms New spindles New Funco front hubs New Funco steering rack New Funco suspension pivots New rear air bags & mounts New Funco door kit Used set or 934 rear arms
Last reply by Pennywise, -
- 2 replies
- 632 views
I was given a pair of 16.50x15 dunesports. I noticed they are a taller tire than my 14.50's. Is there any reason I wouldn't want to use them on a subi/2d car? Will they cause too much traction? Pros/cons?
Last reply by Stinky, -
- 1 follower
- 3 replies
- 469 views
DM me @ rey_ray76
Last reply by AlpineFunco, -
- 0 replies
- 596 views
I have a Gen 4 fuel tank and trailing arms left over from my last project. If anyone needs them shoot me an offer. Alex 714-420-4331
Last reply by Pennywise, -
- 4 replies
- 983 views
I bought a funco gen 3 about 8 years ago and have been changing a few things on it. The biggest change in the handling of the car was adding ping tanks, something had to be done about the rear end hopping, kind of spooked me a bit. They are 1/2 gallon capacity. Initially I had 3/8" lines between the rear bags and the tanks. It took some of the rear end hop out, changing to 1/2" air lines and backing out the bottom compression bypass added slow body roll but helped in the medium whoops. The ping tanks have a similar effect of adding a larger air bag. I run 42 psi in the rear at ride height, that increases dramatically during compression. When the air bag rebounds the 2.5 b…
Last reply by SandNDI, -
- 10 replies
- 915 views
Where is everyone installing the compressor tank in a Gen 4 and what size? pictures if you have them thank you
Last reply by L.R.S., -
- 2 replies
- 573 views
Veterans day is quickly approaching, scheduled for new powder coat on monday and I’m in the later stages of updating the look of my gen 3. I discovered excessive play in the trailing arm uniballs. The problem I’m having is finding a replacement for them. Pretty much all the number 12 uniballs I find have the outside diameter at 1.4375. Too small for the machined cups in my trailing arms. I’m seeing 1.497 with my calipers, I did zero it prior to measuring. Any body have any info on a replacement???
Last reply by SandNDI, -
- 2 replies
- 853 views
Anyone happen to have a Air Lift Performance Manifold only? It needs to be 1/4" push to connect ports Part # 72635W or 72615 Please advise Thank you
Last reply by Snappy, -
- 3 replies
- 689 views
Does anybody have a list of sizes and thread hand, for a complete set of heim joints I would need for a 2006 Gen 4. I think this went away during the great crash of 2020. grant@funco ?
Last reply by danwalker, -
- 6 replies
- 2.8k views
Car has been fully detailed and fresh oil change. Giving fellow Funco members 1st dibs before I post anywhere else this weekend. Car was completely stripped down and powdercoated in off-season. 4 trips on a @alper_motorsports 383 stroker. 8 trips on a Fully rebuilt 2D. All new internals Shocks rebuilt and dialed in by shocktalk at beginning of season Tuned by dunehoon Brand new Jettrim seats with new PRP 5 point harnesses (4 trips) Aem dash Switchpro Gps Quick release steering where PCI Trax intercom with 4 headsets Radio High-flow water pump Proam shifter Airlift air ride system Upgraded rac…
Last reply by ROBERT L, -
- 1 reply
- 672 views
Looking for a Funco Gen 3 Gas Tank ASAP! Thank You! -Trevor Joye
Last reply by PICKUPYOURTRASH, -
- 3 replies
- 785 views
Does anyone know the part number for the steereing rack boots for a Gen4 Funco? One of mine has a part number of BT-240, the other is BL-1204. Not having any luck searching for those numbers yet, so figured i'd ask here. Thanks.
Last reply by Hednjry, -
- 13 replies
- 1.3k views
Wanting to fix 2 issues with my 2006 Gen4 so looking for ideas and pics please. 1. How to fix the steering wobble, perhaps fabricating longer tube off existing column. 2. What is used to secure the gas pedal line on metal plate (not zip ties as I have shown).
Last reply by Grant@Funco, -
- 4 replies
- 1.2k views
So I smoked my rear paddle last weekend and need to buy a new set. I think I currently have the 14.50 X 15 Dunesport with the #1 cut( might have been a #2 originally but tires were pretty worn when I bought the car.) I really like the way the tire works now but just curious if the #2 cut might be better now for the power I am making now. (600 HP Subaru)
Last reply by David, -
- 3 replies
- 1.9k views
Anybody know the part number for a front airbag? I want to keep a spare.
Last reply by fairlydangerous1, -
- 5 replies
- 1.8k views
2006 Gen 4, leaking power steering fluid from rack. I believe this is a Ford Mustang rack. Anybody know of a rebuild or O ring kit for this?
Last reply by Hednjry,