Sandcar / Off-Road Parts
418 topics in this forum
-
- 0 replies
- 459 views
LS stock crankshaft.. journals 0.10 125.00 951-757-1752 leave message
Last reply by Engine dude, -
- 1 reply
- 458 views
GEN6 Funco OEM parts for sale Roofline Bar set $1500 dash $500 hood sides $500 nose cap $450 side scoops $250 GEN6 dual fuel tank set $1650
Last reply by SANDBAM, -
- 3 replies
- 456 views
Like title. Wheels and tires. Tires and in a used condition. No chunks and one will hold air only for about 7 to 8 days before you need to refill. The other holds air. Wheels are in great shape and only need polish if so desired. Also, they are 14mm lug holes. $ 550.00
Last reply by richard h, -
- 2 replies
- 454 views
Let me know. I have a tire that cracked inside at the bead and would not hold air. Very weird spot to fail. Thanks
Last reply by onanysunday, -
- 0 replies
- 452 views
Full set of front and rear Gear One buggy hubs. Includes rear super greasers with 934 33 spline cvs, 12” vented rotors, and (1) 6 piston gear one caliper with pads. Front is 2” hollows (snouts included) with 11” rotors, 4 piston calipers with pads. All bearings and races are good in the front and rear hubs, you will need new seals for the rears. Will also need (1) 6 piston rear caliper ($600) from gear one to complete the set. Wide 5 buggy pattern hubs (5x205). Feel free to message me any questions or for more pictures. $5500 for everything. Located in Riverside Ca
Last reply by Cjs951, -
- 0 replies
- 451 views
Just got this back from Rancho, its 930 flanges and set up for a V8 5:14 R/P 290x186x144x114 G50 shaft $7500 obo (a new 2D is now $10,995)
Last reply by Pennywise, -
- 7 replies
- 446 views
For 2 12 inch subs ! andy 760-443-754 eight located in North county San Diego
Last reply by Poule43, -
- 2 replies
- 443 views
Set of 2.5” 3 tube bypass. 14”. $1400 for the set. Ship on your dime. I will be in Glamis next week and every 2 weeks after that. 480-231-6386
Last reply by lincster, -
- 2 replies
- 437 views
Rear tires - BFG projects - 35x12.50x15 Front tires- Baja Pros - 35.0/10.0/15 No longer need these, used as rollers for sand anyone have a use? not sure what a fair price is - Start at $1,600 OBO ? Located in St. George Utah.
Last reply by FOG, -
- 0 replies
- 429 views
Funco gen 4 dash $30 pack coors light White scoop with air box for LS1 and extra filters $150 Black scoop $100 Jonathan 951-520-3002
Last reply by RPMsRUP, -
- 1 reply
- 428 views
PCI Race Radios Intercom $150 Rugged Race radio car to car $200 ICom Radio car to car $200 RzR mounting brackets $25 each All have been tested, powered on and working. You will need power cables with the correct connector on all. Will ship, you pay for shipping. **Rugged intercom has been sold**
Last reply by GeneralG, -
Do happen you have one 2"x16" King coil over taking up space? Maybe a spare? or extra? or even a pair. I don't care if its emulsion, piggy back, or remote Resi, I need one and will reconfigure it. I know it's a long shot, but throwing it out - let me know what you got ... thanks
Last reply by Fullthrottleguy, -
- 0 replies
- 424 views
Looking for 10.75 x 15 front tires For my sandcar. 619-971-7392 ready to buy today!
Last reply by Trevor, -
- 7 replies
- 421 views
I took these tires off of the Jeep that I recently bought. Too aggressive for my needs so I thought I would try and sell them but not sure how much to ask. I have 5 tires 305/65R17 with one that has not been used. The other four are in excellent condition with by my estimate have about 60 to 70 percent life left.
Last reply by FOG, -
- 1 reply
- 411 views
I have 2 (or 3) Bosch p/n 0580254982 Fuel Pumps for sale (I have a 3rd in the trailer but can't confirm the p/n at the moment) In working order with -6 AN fitting on the outlet $60 each or both for $100 ($150 for all 3) Located in Torrance, CA but ship it on your dime. Mike (three one zero) three four four-2115
Last reply by Mike E, -
- 5 replies
- 403 views
Have a pair of 14.50x17 dunesports for sale. These are the funco paddles. 700$ Pair of 2.4x15 remote reservoir coil over kings 1200$ Pair of 2.0x10 piggyback coil over kings 1000$ 4 gkn 930 CVs. All parts are there and in good shape. 100$ for all 4. Located in Corona. Will be in Glamis 1/1-1/5.
Last reply by Jtmoney714, -
- 1 follower
- 2 replies
- 395 views
50" rear bench, 2 fronts. Dirty but in good shape. $200.00. Local pick up only, Bakersfield. Mike 661 808 1180. Going in trash Dec. 1st. If not sold.
Last reply by Ganzo, -
- 0 replies
- 392 views
Very well built, very fast - Ford Ecoboost with big turbo. Approximately 640WHP - engine flat out gets it - currently in a SCU pro bro - paired up to a PBS sequential - engine is coming out next week - engine is awesome however we are doing a big LS build changing it up. No known issues / your welcome to check it out. If your looking for an engine to keep up with the big boys and is scary fast and a bit unique then this is it. One of only a few that SCU did from what I understand. This engine is very cool/sounds great as well. Don’t need to sell however will make a fellow duner a very good deal and don’t need it sitting around on an engine stand - too nice for that…
Last reply by Bronco1, -
- 0 replies
- 391 views
4- used 934 cv's 35 spline $400
Last reply by KeithS, -
- 3 replies
- 388 views
Getting rid of 2 Heat Exchangers/Oil Cooler. The bigger one is a custom made exchanger that CBR added a fan shroud and fans. Spall 8" fans, pullers. Dimensions are in the pix. Selling this one for $275. Smaller one is CBR Part Number 2827. It is classified as an oil cooler, I used it with Antifreeze as a heat exchanger. The fan is a pusher. $175 for this one. Call or text. 480-231-6386. Located in East Mesa (Phoenix)
Last reply by lincster, -
- 1 reply
- 388 views
For sale complete set of CNC front hubs and brakes with 4 piston calipers I pulled these off my SCU big bro 700.00 text me if interested 714-458-6020 chris
Last reply by CHRIS J, -
- 2 replies
- 387 views
Got some douglas wide 5 aluminum buggy wheels for a 15" tire one has a ding in the lip, that can be easily fixed. Dirty, definitely need a cleaning up. located in Riverside, $60 for both
Last reply by EmpirE231, -
- 2 replies
- 385 views
8.50 x 15 Front Tires ~ Good Condition Located in Menifee Text 951-316-8793 First pic is not the actual tire
Last reply by Mark1981, -
I know its a long shot but does anyone know of any used 12.50x17 front stu tires around? I cant stomach paying what they cost new
Last reply by Axion, -
- 1 reply
- 380 views
Bought this for my buggy and never installed it. New sxs has a pump so I no longer need it. All brand new. Pumper, weld on mount, original mount(not pictured), a new 6ft hose, new 3 ft hose, and a rubber plug for using it solo. $200 east county San Diego.
Last reply by xtracrispy,