Sandcar / Off-Road Parts
442 topics in this forum
-
- 3 replies
- 1k views
Mendeola MD4S 2D 4 speed for sale Rebuilt at Transaxle Engineering Zero miles on it, has 930 flanges 4.86 R&P 3.11, 2.17, 1.71, 1.39 $7500
Last reply by Reddragon, -
- 2 replies
- 233 views
15x12 tires are no good. Take $500 for them or make an offer
Last reply by FOG, -
- 1 reply
- 195 views
Take $6k for it or trade. Or make an offer or trade. text me 619-244-3322
Last reply by Grease Monkey, -
- 0 replies
- 130 views
Have 4 bars that were installed and used one trip at glamis. Looking to trade for a kc pro6 light set up or sell each at $250 text me 619-244-3322
Last reply by Sandman, -
- 0 replies
- 104 views
Really good clean rack. Won’t fit my SU and need to sell. Or trade for a kc pro6 light setup. $1500 text me 6192443322
Last reply by Sandman, -
- 2 replies
- 225 views
I have two pairs of Baja Pros for sale both are shaved - 33s good condition 35s fair condition (have some scratches and markings but nothing fatal or structural ) 33.0 / 10.0 - 15 = $350.00 pair 35.0 / 10.0 - 15 = $350.00 pair Located in PHX - but I am driving to San Diego tomorrow so can bring that far if needed text Ben - 6o2-910-2014 35s 33s
Last reply by Bobalos, -
- 2 replies
- 239 views
My car came with Douglas 17” beadlocks but I’d like to trade someone FRONT WHEELS ONLY. 15s won’t fit over my rear brakes, but I like the look and tire options up front with 15s instead of 17s. If anyone has 15” wide 5 beadlocks they’d like to trade shoot me a pm.
Last reply by Readster, -
Jonathan 951-520-3002 Funco GEN 5 Dash, with gauges $300 Fiberglass Dash $100 Mendeola S4 gear indicator, $100 Mendeola S4 end cap and Mid bearing housing $400 Igloo cooler cover black with red piping $20 or 18 pack coors light 930 output stubs small diff $200 934 output stubs large diff $300
Last reply by RPMsRUP, -
- 4 replies
- 365 views
Douglas 15x14 wide 5 VW Beadlocks with a 3.5” backspace. Excellent condition. Wheels only. No Tires. $600 for the pair.
Last reply by FOG, -
- 1 follower
- 2 replies
- 422 views
Have a MEFI 4 pulled from a running Turn Key built LS6 with a mild GM Performance cam. includes most of the harness. The harness is missing the relay packs for Fans/Fuel pump and Power Feed in. I believe this can be bought from CBM and will plug into this engine harness. if not CBM does have the diagram for this harness on there website and it would be easy to build for your setup. Link: chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://custombuiltmotors.com/images/new_wiring_diagrams/CBM%20MEFI%20Relay%20Pack.pdf asking $400. located in Apache Junction AZ. can ship if needed. text or call Mike 916-584-5513
Last reply by mc22, -
Fresh all Weddle 091, 930 drive flanges- $4500 Just had Wright gearbox go through it. New main shaft (1st & 2nd gear) and some other stuff- see receipt. Trans was mated to a stock J35a4. Gear ratios- 4.57 - 3.44 - 2.25 - 1.78 - 1.35 With 13.50 Extreme Holeshots the gearing is great for duning, 2nd and 3rd and some 4th in the bigger faster dunes. I would also sell as a combo with the J35, stage 4 pressure plate (Kennedy), adapter plate (KEP) and starter (IMI) for $6500
Last reply by Wash 10 Crew, -
- 1 reply
- 165 views
Rear trailing arms from a 2007 Desert Dynamics Class 1. Set up for ProAm midboard hubs with six piston calipers. No cracks or damage. I am selling them because they are too long for my car and had to get shorter ones made to get the CV angles correct. Located near Tucson but might be able to get them to San Diego area. $600 for the pair.
Last reply by realtreeHD, -
- 1 follower
- 2 replies
- 218 views
WTB front combo hubs, wide 5, do not need brakes. Let me know what you have, thanks
Last reply by chevyman500, -
- 1 follower
- 8 replies
- 1.3k views
I bought these a few years ago as spares for my buggy. they had the aluminum CV Flanges & the flanges were beat up pretty good. I called @parker@gearone @Gear One and he set me up with a new set (they had them sitting on the shelf). I have not done anything to these, I have not even cleaned the grease off of them, just bought the flanges & stuck them in the trailer with the rest of the spares. The bearings & seals are used. some of them are OK, some are junk. the 3 CV's are used out of my buggy. I found one tore up during summer maintenance so I switched all 4 of them to @J Alper CV's in the buggy. They are great for spares. There are …
Last reply by Bobalos, -
- 2 replies
- 564 views
Rear tires - BFG projects - 35x12.50x15 Front tires- Baja Pros - 35.0/10.0/15 No longer need these, used as rollers for sand anyone have a use? not sure what a fair price is - Start at $1,600 OBO ? Located in St. George Utah.
Last reply by FOG, -
- 5 replies
- 737 views
Mefi 4B with harness for LS was on a LS2 tuned by CBM harness is in perfect shape, going to Holley setup, $1000 Jonathan 951-520-3002
Last reply by HydroPower, -
- 0 replies
- 181 views
Derale Oil / Trans Cooler used in good condition with working fan. $50.00 New in box Willwood 4 piston brake caliper (no pads) $100.00 2 ea Bates style CV Boots New $10.00 ea
Last reply by smerchan2003, -
- 1 follower
- 18 replies
- 3.1k views
Autometer gauges with billet bezels $400 Beard seats x2 $500 Padla trak 1300plus on 15x12 Douglas wheels $350 LS Headers $200 Located in queen creek AZ
Last reply by Readster, -
- 10 replies
- 2.3k views
Used for about 30 minutes, and realized it was too small to shed the heat from a 6.7 PSD at 100% load... Includes 210* thermo switch. Holds 2 quarts and has a HD Spal fan integrated. In PHX. $600 Clicky
Last reply by Kraut_n_Rice, -
- 1 reply
- 324 views
Complete set of Livorsi Vantage View gauges (includes tach, voltage, water temp, and oil pressure). These are out of the boxes but are brand new. $300 call/text Chris at 951-834-2622
Last reply by JPS_Motorsports, -
- 0 replies
- 253 views
4 Champion beadlock rings 17’’ Powdercoated black - 125$ 4 Dirt bags coilover covers black and red (were on my 2.0 coil carriers) - 25$ Call or text me (714) 321-0748
Last reply by Banshee380, -
- 3 replies
- 416 views
I've got a brand new pair of extreme revolution 1600.15 paddles for sale. They are uncut so they have both paddles still on the tire. So I attempted to cut the paddles myself and cut too deep on the second paddle I was cutting. I stopped and haven't touched them since. I feel a volcanized patch or a tube and these tires will operate like new. I don't have a car that needs a tire of this size any longer. Date code looks like 5014. $300 and they are yours
Last reply by JM PRO, -
- 1 reply
- 312 views
For Sale - Howe 2" Chrome Rack and Pinion. Was damaged in an accident and has been sitting on a shelf for a couple years. Needs a rebuild and top plate. Set up for integrated servo (servo mounts directly onto rack) $200 Located in Torrance CA Contact Mike (310) three four four-2115 text is fine or message me through the site Local pickup. I'm not going to ship this
Last reply by Mike E, -
- 2 replies
- 270 views
For Sale - A pair of Fox Shocks 14" x 2 1/2" hose remote reservoirs. Went to a simple emulsion on the coil over side and no longer need these. The hose is about 3 feet in length. $300 Located in Torrance CA Local pick-up only (I don't want to ship these) Contact Mike (310) three four four-2115 text is fine or message me through the site
Last reply by Mike E, -
- 1 follower
- 1 reply
- 413 views
Mendeola 2D. RP 5.14 / 1st 264 / 2nd 193 / 3rd 156 / 4th 109. 934 CV flanges. Upgraded Funco nose cone. Comes with Pro Am shifter and linkage. Trans was completely rebuilt 2 years ago by Dave Folts with very little use. 7,000 Raymond 951-751-2559
Last reply by bringenkaos,
