Sandcar / Off-Road Parts
412 topics in this forum
-
- 3 replies
- 1.4k views
Chenowth 4 seat SV16 (Rory Chenowth chassis). honda 3.5 vtec (jp design). Bus box with rhino case weddle internals(transworks) great buggy have all 4 seats. rears are removed currently. 3 out of 4 new cvs last season. New high performance fuel pump. New timing belt, tensioner, water pump all done last season with 1 trip on them. Full set of sand tires/paddles on rims and full set with 5th spare hard pack Kanata Mongrel tires on rims. Fast car, dunes really well. Vtec is set to come on super low car pulls really well. No trades, have another kid on the way taking a few seasons off. $12,500 obo 619-244-7799 call or text
Last reply by T.Sherlock, -
- 3 replies
- 233 views
I have 3 complete GearOne 934 CVs with 300m cage. They are in good used condition and show normal wear. $125 each plus shipping. Also have 1 GearOne 934 CV with 300m cage but is missing the star and one ball. $75 plug shipping. Located in Phoenix. Thanks!
Last reply by parker@gearone, -
- 3 replies
- 997 views
Used Ls 5.3 block.. used very short.. bought new from turnkey.. cylinder walls are in perfect shape.. bore 3.780.. needs light hone for new piston and rings 400.00. 951-757-1752 leave message
Last reply by BoydCo, -
- 3 replies
- 489 views
I went up to a bigger supercharger this summer so selling my whole system. 1.7L Magnusson for a stock LS1, F body belt line (Camaro). This blower was designed by Magnusson to bolt directly onto a stock Camaro. I was getting 6.5lbs of boost on my LS1. I sent the blower to superchargersonline and had them rebuild the entire thing before I used it. Everything was new including rotors. They also polished the rotor housing, fuel rails. Injectors are included. They are 80lbs/in Bosch injectors. I used my old TB for my new blower, a 90mm. You can get them from Holley. Including my heat exchanger that has 8" Spal Fans (pullers). Heat exchanger is …
Last reply by lincster, -
- 3 replies
- 1k views
1 pair of silver Eibach 10" x .250 x 150lbs for a 2.0 shock body and 1 pair of silver Eibach 14" x .250 x 250lbs also for a 2.0 shock body. Both pairs have been installed and used for suspension testing only, then removed and put back in boxes. $100 per pair, I can ship on your dime.
Last reply by Greengo, -
Wtb Headsets
by Nic- 3 replies
- 488 views
I am looking for a set of 4 headsets. Don’t care if they are behind or above the head, pci or rugged. What do you have lying around?
Last reply by Trevor, -
- 3 replies
- 349 views
I upgraded to the Trax system so selling my old system. Works fine. 4 person set up. Intercom, ICOM CB for car to car. Antenna. All wires and cables that the system came with. Bought new in 2009. No pix as my garage is a mess. $800 obo. You pay shipping. East Mesa in AZ.
Last reply by lincster, -
- 3 replies
- 556 views
Hi For sale 2 BTR 15x10 2 1/2 backspacing/powder coated Black with White rings and a set of STU 33 x 15 pro #2 cut paddles with 5 trips on them this past season no punctures tires stay aired up, Also a set of 15x4.5 1 3/4 backspacing BTRS Powder coated black with White rings. Asking $2200.00 obo send me a text or call 760-953-3572 I am in the 93211 Barstow CA area and Pahrump Nv 89048. .
Last reply by DDBRATT, -
- 3 replies
- 1.3k views
Wheels are not for sale but the tires are. They are in great condition. Pm with best offer. These bad boys list for $975 each. Thanks for looking
Last reply by Mike E, -
- 3 replies
- 913 views
Going through some things in the shop today and found a total of 3 hi torque starters that fit an 091. PM if you're interested
Last reply by realtreeHD, -
- 3 replies
- 1.1k views
These are heavy duty vinyl seat covers originally made by Beard seats. They will fit standard seats that are 21" or less wide with the rounded head rest. They are great for rain and will stay on when open trailing due to their sewn in straps and buckles. There are 4 total and come with storage bag. Picture with black cover show how they fit. These covers are gray. $80 Scott 623-229-7395
Last reply by BoydCo, -
- 3 replies
- 263 views
I've got a brand new pair of extreme revolution 1600.15 paddles for sale. They are uncut so they have both paddles still on the tire. So I attempted to cut the paddles myself and cut too deep on the second paddle I was cutting. I stopped and haven't touched them since. I feel a volcanized patch or a tube and these tires will operate like new. I don't have a car that needs a tire of this size any longer. Date code looks like 5014. $300 and they are yours
Last reply by JM PRO, -
- 3 replies
- 1.4k views
Wheels and paddles in good shape. 1 paddle has 2 small chunks.
Last reply by realtreeHD, -
- 3 replies
- 765 views
Brand new, purchased from Kartec in 2020. They have been sitting inside the shop since purchased. Asking $3,300. Location: Orange County Call or text: 7147947342
Last reply by HBLOWEN, -
- 1 follower
- 3 replies
- 1.2k views
Ordered some hardware to make a couple more high lift jacks to keep in various places (I’m not the type to have 1 of something and move it all over). Jeff is a straight shooter and is willing to ship the parts which saves me in time and effort in traveling to San Diego to pickup. if you don’t already have one of his sand jacks, get one. You won’t be disappointed
Last reply by L.R.S., -
- 3 replies
- 635 views
$250 For the 2 tires Cash OBO.........Make an Offer Need to sell to pay for a full set I got from a buddy with rims for my sand car........... Make an offer Call Andy 760-443-754 EIGHT
Last reply by lardass, -
- 3 replies
- 672 views
CBR Radiator 18.5"x35". Pulled out of our Funco Gen6 LS7. Has a very, very small leak somewhere. Ran it for several seconds that way. $00.00 Located in Redlands. Rather not ship. Thanks for looking. **** Gone to a good home****
Last reply by LtPyro, -
- 3 replies
- 623 views
Sold the buggy a year back and haven’t had time to post these until now. Used them one time otherwise they sat in the trailer or shop. 4 - 15” bead lock wheels with standard VW 5 lug Rears - 33x12.50r15lt Fronts - 7.00-15LT Great tires just no use for them anymore. Will wash them before. No leaks. $1,000 obo
Last reply by Vinsanity, -
*No longer available Took this out of a Gen 3 hustler located in Anaheim $ Free Alex 714-420-4331
Last reply by BigRay800, -
- 1 follower
- 3 replies
- 1.4k views
Brand new, no longer needed $500 takes it. Johnny 714-936-9418 i can ship on buyers dime or pick up located in corona
Last reply by Wrecked, -
- 3 replies
- 901 views
Need GM / Chevy 17 inch wheel 8 lug for a 2500 spare wheel........I upgraded to 17 inch wheels a few years back. I need a spare tire rim that is the 17 inch 8 lug Chevy OR I heard that the dodge 2500 rim from 2003 - 20013 will work Anyone have one of these????? Andy 760-443-754 EIGHT
Last reply by Poule43, -
- 3 replies
- 1.3k views
Set of Doug Thorley headers for an LS. 500$ 9” single disc flywheel, pressure plate and clutch. All used but 200$.
Last reply by KLC, -
- 3 replies
- 496 views
I have a set of 17" - 3" back spacing Douglas bead lock wheels. Rings and all hardware included. One of the wheels has a couple weld repairs on the inside of the wheel. I purchased new wheels, and these are just sitting around BEST OFFFER.
Last reply by SANDFORME, -
- 1 follower
- 3 replies
- 830 views
Three 42x14.50x17 goodyear wrangler mtrs Good shape, no plugs or patches $ 1k obo
Last reply by Joey, -
- 1 follower
- 2 replies
- 1.9k views
Used dash pod and gauges with harness. As removed from my Hustler. Make an offer. Senders still in the engine.
Last reply by Grease Monkey,