Sandcar / Off-Road Parts
412 topics in this forum
-
Last reply by BoydCo, -
-
- 7 replies
- 1.4k views
4 class 10 tires and wheels. Method wheels, 35x10.5x15 bfg tires. These were perfect on my previous car. (Honda 3.5 and 2-D). They are not enough tire for my current car. I've held on to them, cause while not perfect, they work, and replacements have been hard to come by. I have located some viable replacements, but I'm sure they will go quick. Want to see if there is any interest in these, I know previous to the site crash, someone on here wanted them. Can't remember who though.....
Last reply by Looney Duner, -
- 1 follower
- 3 replies
- 1.4k views
Brand new, no longer needed $500 takes it. Johnny 714-936-9418 i can ship on buyers dime or pick up located in corona
Last reply by Wrecked, -
- 1 follower
- 7 replies
- 1.9k views
13.00 Plus 15 paddles with Douglas wheels and 8.50 front stu with matching wheels... Paddles still in great shape
Last reply by TCS T, -
- 1 reply
- 1.3k views
Got a brand new Aeromotive A1000 fuel pump only used for mock up, no fuel has been ran through this, going a different route. Asking $325.00 buyer pays shipping.
Last reply by desrodunes1, -
- 0 replies
- 1.3k views
Had these for a few years no holes or plugs both hold air no issues other then some rubbing marks from the arms that I never noticed til I put spacers on and they gave me no issues good for a spare set or a couple seasons. 200.00 located in ramona ca. 8582545653 ben
Last reply by Kingkong, -
- 7 replies
- 2.2k views
From my Gen 4. Bearings and races still good and serviceable. Includes new set of brake pads and new CR seals. I switched over to a micro stub setup. I believe these were gray area hubs? I also have a box of 930 CVs somewhere and can probably put together a set of 4. One of the 6 bolt CV boot retainers is damaged and can be massaged and repaired or replaced. What is it worth??
Last reply by danwalker, -
- 0 replies
- 1.5k views
King 2.5 14” and 10” coilovers shocks only new chula vista $1380 per pair
Last reply by Orbot619, -
- 6 replies
- 1.8k views
LS-7 434-Ci DARTON SLEEVED MOTOR LS-7 Darton Sleeves – stroke and bore is 4.00’’ x 4.155’’ Sleeves can go to 4.185 NEW 2618 Forged Pistons DSS FX2 15CC Dish Steel Top Ring 1.2 x 1.2 x 3mm LS-7 Titanium Connecting Rods – Factory 12 point rod bolts LS-7 Factory Forged Crank - Rebalanced for 4.155’’ pistons 12 point Flywheel bolts NEW Clevite Main Bearings and Rod Bearings with Main Studs Durabond Cam bearings Comp 850-16 Lifters NEW Factory AC-Delco Lifter Tray NEW Chromoly .080 Pushrods Tatum Motorsports Venom Camshaft .600 lift Comp Dual Spring kit 155lbs seat – 450lbs open NEW Valve Seals NEW L…
Last reply by J Alper, -
- 0 replies
- 1.4k views
ttt, Shoulder harnesses only, dated 2007 local pick up, or I'll ship you pay cost via Venmo, Zelle, PayPal
Last reply by Roaddog, -
Crow Enterprizes Quick Release Seat Belt 2 Inch Lap Shoulders 5 Point *Partial* Set Incomplete Doesn't contain all parts for installation, comes with both shoulder straps, support strap and everything in the pictures. View all photos. $60 Located in North Phoenix. Thanks for looking! -Scott 623-229-7395
Last reply by BoydCo, -
- 1 follower
- 6 replies
- 2.2k views
As title says have several parts that are taking up space. Make a reasonable offer and it's yours. Some can be Shipped on your dime. Located in California city. Seven 7zero 6five3 2three16. Ls6 intake with rails, tb,injectors installed + extra set, and sensors. = $ 250 Charlynn, power steering pump w/ pulley and bracket, and reservoir = $200 Beard seats and Simpson 5 point harnesses = $200 MEFI ecm and harness. Setup for stroke Ls6 (383) mid engine= $600 Have to add pictures in comments due to limit on file size. So see below for additional pictures.
Last reply by Slowpoke107, -
- 1 reply
- 908 views
I just removed these from my car they work great. I went with HID. 2 lights with ballasts. 100 bucks located in North County SD
Last reply by SANDFORME, -
- 0 replies
- 419 views
Looking for 10.75 x 15 front tires For my sandcar. 619-971-7392 ready to buy today!
Last reply by Trevor, -
.
Last reply by Mike E, -
- 2 replies
- 1.1k views
Looking for a set of rims and tires to use on a dyno for the VW bolt pattern that they use on the sandrails, the taller the better. I do have some BFG's I could use but still need rims.
Last reply by BONES, -
- 5 replies
- 2k views
Hey guys I pulled this LS engine cover off my car it just got re powder coated black, it will not fit with my new intake if anyone can use it come pick it up. will ship on your dime.
Last reply by Indian Joe, -
Came out of a Gen 3 Funco Buckets approx 18x14.5 Bench 18x46 $600 obo Call or text Joe 909-841-2063
Last reply by etdust, -
- 8 replies
- 1.6k views
Like the title says. Looking for some Fox 2.0 16" 350lbs springs. Could also use a set of 12" 250lbs springs for same fox shock. I know I can buy new and don't have an issue with it but thought I would ask here first. I'm in Oceanside. Appreciate it! Thanks!
Last reply by JP DESIGNS, -
- 3 replies
- 1k views
1 pair of silver Eibach 10" x .250 x 150lbs for a 2.0 shock body and 1 pair of silver Eibach 14" x .250 x 250lbs also for a 2.0 shock body. Both pairs have been installed and used for suspension testing only, then removed and put back in boxes. $100 per pair, I can ship on your dime.
Last reply by Greengo, -
Full Set of 17” DWT Wheels w/ OMF bead-locks and 36” STU Paddles and 12.50 Razor Masters
by fastjesse- 0 replies
- 2.4k views
I have a complete set of 17” front and rear DWT billet center wheels with OMF Phaze5 Beadlock Rings and inner reinforcement rings as well. Rear wheels are 12” wide & have 3.75” rear spacing. Tires are Sand Tires Unlimited 12.50x17 Razor Master Fronts and 36x17 Sand Blaster #2’s in the rear. All tires have 2018 date codes. *Sale Pending* Call or Text Jesse 626-488-038three Located in Norco, CA.
Last reply by fastjesse, -
- 1 reply
- 961 views
Picked these up with rims last season with one of my cars. I'm keeping the rims and considered keeping the tires for spares but I don't see me needing them anytime soon. Date code shows 2007. Looks like they had staflo starch in them. Paddles are excellent. No apparent side wall damage either. Save over new at 640.00 each. Selling for $400.00 each or $750.00 if you buy the pair. Located in Costa Mesa CA
Last reply by Grease Monkey, -
Delete
Last reply by Blacktop, -
- 1 follower
- 1 reply
- 1.1k views
Last reply by ChasingSand, -
- 1 reply
- 902 views
I have a Edelbrock Pro Flo 4 fuel injection system from my LSX454. It fits LS7 style heads. Kit is complete with all sensors and computer. Intake is polished. Motor was assembled and dyno'd by redline. Sold the engine without the system. Its only had dyno and about 1 hour run time on it. $1750.00
Last reply by cek,
