Sandcar / Off-Road Parts
412 topics in this forum
-
- 1 follower
- 6 replies
- 1.1k views
I bought these a few years ago as spares for my buggy. they had the aluminum CV Flanges & the flanges were beat up pretty good. I called @parker@gearone @Gear One and he set me up with a new set (they had them sitting on the shelf). I have not done anything to these, I have not even cleaned the grease off of them, just bought the flanges & stuck them in the trailer with the rest of the spares. The bearings & seals are used. some of them are OK, some are junk. the 3 CV's are used out of my buggy. I found one tore up during summer maintenance so I switched all 4 of them to @J Alper CV's in the buggy. They are great for spares. There are …
Last reply by Bobalos, -
- 6 replies
- 197 views
Looking to see if anyone has a spare J35A4 Cylinder head they would want to part with? Its considered the front head on an Odyssey but its the right side if you are facing the crank pulley. 909-TwoTwoNine-1874 Thank you!
Last reply by LtPyro, -
- 6 replies
- 2k views
SOLD - I have 1 set of STU 33-17 #2 cut paddle tires. I moved up to bigger tires. They are all in really great shape. No plugs no patches no chunking. I bought them off of GD or RDC and paid $700. I took them to Glamis for 1 trip. All hold air (I use Sta-Flo Starch as insurance) Looking to get $700 The set is 2013 date code. Current price for new ones at Kartek is $735 each before tax. Tires are in Torrance, CA 33-17 #2 cut (2013) $700 for the pair Mike
Last reply by Mike E, -
- 1 follower
- 6 replies
- 2.2k views
As title says have several parts that are taking up space. Make a reasonable offer and it's yours. Some can be Shipped on your dime. Located in California city. Seven 7zero 6five3 2three16. Ls6 intake with rails, tb,injectors installed + extra set, and sensors. = $ 250 Charlynn, power steering pump w/ pulley and bracket, and reservoir = $200 Beard seats and Simpson 5 point harnesses = $200 MEFI ecm and harness. Setup for stroke Ls6 (383) mid engine= $600 Have to add pictures in comments due to limit on file size. So see below for additional pictures.
Last reply by Slowpoke107, -
- 6 replies
- 1.2k views
Started this Sand Bullet build for my son but want to move in a different direction. Turboed CBR 1100 Engine Lots of extras and accessories. Let me know if you have any questions. Needs finished, powder coat, some fab/welding, etc. $7000
Last reply by Duner19, -
- 1 follower
- 6 replies
- 912 views
LS / Holley Engine Harness.. Maybe 2 hours of run time. Perfect condition. $250 Shipped
Last reply by J Alper, -
- 5 replies
- 950 views
I have a BRAND NEW Weddle / Mendeola s5 Just built by Wright Gear Box gen 3 case ,w/ potentiometer 934’s Weddles new deep cut R&P R&P 4.63 3.09 2.14 1.59 126 1.04 Located in Nor Cal 17k
Last reply by Realbadlarry, -
- 5 replies
- 1.4k views
Built May 2022. Built by Rob Smith of Smith Sand Cars Comes with: Fully tabbed LS/2D Iron Block 6.0L - 8K miles on engine. (Needs rebuild as it had an Oil Pump Failure - Engine disassembled) Aluminum Work - Roof, side panels, floor pans, rear wing, Nose Piece Brakes - Front & Rear Cutting brake Steering shaft & Quick Disconnect Steering Wheel Rack and pinion Tie rods Seats (2 front) New Sand Tires Unlimited 33x15 Blasters New Douglas bead lock wheels New Sand Tires Unlimited Front 3 rib 8.50X15 New Douglas bead lock wheels Radiator Fuel tank Clutch and brake pedal assembly Car is built extremely well. $13,500
Last reply by Mark1981, -
- 5 replies
- 477 views
Misc buggy parts that I have collected over the years free. some parts for a Subaru ,fuel rails, injectors
Last reply by Poule43, -
- 5 replies
- 958 views
Falken Wildpeak A/T Tires in Good Shape (2) Load Range E / LT285 70R 17 $165 Cash For Both Call Andy 760-443-754 EIGHT Located in Carlsbad CA (can Bring to glamis)
Last reply by Poule43, -
I know it's a long shot but throwing it out there. I'm looking for the possibility of tracking down an S4D transaxle preferably new. Anything out there let me know. I am aware of the shortage. I have 2 still that I've been waiting for since June. Right now I have a customer that really needs one and would like to have one more trip this season.
Last reply by Pennywise, -
-
- 5 replies
- 1.4k views
These parts came off my car. I'm not familiar with hydraulic power steering. Everything I've used is electric. If this is something you can use shoot me an offer.
Last reply by realtreeHD, -
- 5 replies
- 1.1k views
I am selling my Turbo Subaru. It was rebuilt by the previous owner who is a professional engine builder and came out of his sandcar. It comes with the ECU and harness, HKS boost controller, intercooler, intercooler scoop, Outfront Motorsports exhaust and reinforced bottom oil pan. Also comes with a Kennedy Engineered Products engine adapter. Flywheel is for a 228mm clutch. It is a closed deck block, CP pistons, and I think Carriilo rods. Comes with most everything in the pictures (I did not take a picture of the harness). I am keeping the clutch and pressure plate. Ran good when I pulled it out to service the transmission. I am only selling because I am putting an LS …
Last reply by raspadoo, -
- 5 replies
- 359 views
Looking at buying a used set to try and see if I like them before I buy a brand new set. Or if someone has a set I can borrow for a weekend.
Last reply by Jtmoney714, -
- 5 replies
- 1.4k views
https://phoenix.craigslist.org/evl/snw/d/mesa-sandrail-paddles-very-used-but/7442547709.html
Last reply by Jammer75, -
- 1 follower
- 5 replies
- 1.2k views
Sold...
Last reply by xtracrispy, -
- 5 replies
- 784 views
Motor came from a salvage yard and is claimed to have 120K on it. It is the cleanest one I have ever got a hold of. It has the factory engine wire harness as well. At this point, stock condition, I can see it needs 3 sensors that got broken at some point. Price is $350.00. This price will change as time goes on and the motor is set up for a sand car. This will happen later in summer.
Last reply by ROBERT L, -
- 5 replies
- 387 views
Have a pair of 14.50x17 dunesports for sale. These are the funco paddles. 700$ Pair of 2.4x15 remote reservoir coil over kings 1200$ Pair of 2.0x10 piggyback coil over kings 1000$ 4 gkn 930 CVs. All parts are there and in good shape. 100$ for all 4. Located in Corona. Will be in Glamis 1/1-1/5.
Last reply by Jtmoney714, -
- 5 replies
- 316 views
Funco dash with Livorsi gauges and gps. North Fontana 80 bucks. Pickup only. 909-229-one eight 74
Last reply by ChasingSand, -
- 5 replies
- 1.9k views
Ordered for a build, but was damaged during shipping. Holley doesn’t want it back. Little time with a file and it’ll probably be fine. $150
Last reply by Rockwood, -
- 5 replies
- 1.8k views
SCU Big bro, 800hp twin turbo LS2, mendeola S4D sequential, 934 cvs, 4 prp high back racing seats, crow 5 point harnesses in all seats, Lowrance GPS, 4 way in car intercom with car to car communications, 4 carbon fiber head sets, auto meter gauges, brand new 12.5-17 stu razor master front tires, stu sand blaster 36" #2 rear paddles on Douglas beadlock wheels, king coil over and king bypass shocks on all 4 corners, suspension is dialed in, howe power steering turns super smooth and easily, Baja designs ONX light bar lights up the darkest of nights, green glow in the hood and roof scoops, full body and windshield, windshield comes out with 6 dzus fasteners if you want to ha…
Last reply by Bobalos, -
- 5 replies
- 2k views
Hey guys I pulled this LS engine cover off my car it just got re powder coated black, it will not fit with my new intake if anyone can use it come pick it up. will ship on your dime.
Last reply by Indian Joe, -
- 1 follower
- 4 replies
- 1.2k views
This is enough for a 15. Gal tank. Filling the tank with them limits sloshing and acts as baffles. 50$
Last reply by Stugots, -
- 4 replies
- 964 views
Rears are 2" Backspacing/Tires have only a couple hours on them 16.50 x 15 #2 STU Padla Trak Rears Fronts are 3.5" Backspacing/Tires have multiple seasons on them 8.50 x 15 STU Razor Back Fronts All are 5 x 205 $2300 + shipping
Last reply by ROBERT L, -
- 4 replies
- 1.6k views
Fresh S4 trans from AZ transaxle with brand new ring and pinion. 12K OBO 520-312-4580
Last reply by Punisher,
