Sandcar / Off-Road Parts
420 topics in this forum
-
- 10 replies
- 2.1k views
Used for about 30 minutes, and realized it was too small to shed the heat from a 6.7 PSD at 100% load... Includes 210* thermo switch. Holds 2 quarts and has a HD Spal fan integrated. In PHX. $600 Clicky
Last reply by Kraut_n_Rice, -
- 0 replies
- 1.3k views
Had these for a few years no holes or plugs both hold air no issues other then some rubbing marks from the arms that I never noticed til I put spacers on and they gave me no issues good for a spare set or a couple seasons. 200.00 located in ramona ca. 8582545653 ben
Last reply by Kingkong, -
Used with some minor scratches, but works perfectly. 6 rib style belt. This is for LS series engines running a Camaro or GTO style water pump. $75 Scott 623-229-7395
Last reply by BoydCo, -
- 7 replies
- 2.3k views
From my Gen 4. Bearings and races still good and serviceable. Includes new set of brake pads and new CR seals. I switched over to a micro stub setup. I believe these were gray area hubs? I also have a box of 930 CVs somewhere and can probably put together a set of 4. One of the 6 bolt CV boot retainers is damaged and can be massaged and repaired or replaced. What is it worth??
Last reply by danwalker, -
- 0 replies
- 1.6k views
King 2.5 14” and 10” coilovers shocks only new chula vista $1380 per pair
Last reply by Orbot619, -
- 17 replies
- 2.5k views
So I have this DOHC Subi engine, EJ25, with turbo, intercooler, computer, harness, and stage 3 clutch. I am trying to see what it's worth. Called a few places but had no luck.. as in no calls were ever returned. I do want to sell it. just need to know what is reasonable.
Last reply by John@Outfront, -
- 1 follower
- 7 replies
- 2k views
13.00 Plus 15 paddles with Douglas wheels and 8.50 front stu with matching wheels... Paddles still in great shape
Last reply by TCS T, -
- 6 replies
- 1.9k views
LS-7 434-Ci DARTON SLEEVED MOTOR LS-7 Darton Sleeves – stroke and bore is 4.00’’ x 4.155’’ Sleeves can go to 4.185 NEW 2618 Forged Pistons DSS FX2 15CC Dish Steel Top Ring 1.2 x 1.2 x 3mm LS-7 Titanium Connecting Rods – Factory 12 point rod bolts LS-7 Factory Forged Crank - Rebalanced for 4.155’’ pistons 12 point Flywheel bolts NEW Clevite Main Bearings and Rod Bearings with Main Studs Durabond Cam bearings Comp 850-16 Lifters NEW Factory AC-Delco Lifter Tray NEW Chromoly .080 Pushrods Tatum Motorsports Venom Camshaft .600 lift Comp Dual Spring kit 155lbs seat – 450lbs open NEW Valve Seals NEW L…
Last reply by J Alper, -
- 3 replies
- 1.9k views
Front spindles are gear one I think I didn't write this post correctly originally. I got these parts because someone owed me money. yes I do want to sell these parts, i just don't know their worth. Need some help maybe on what they are worth. Thank you lardass for pointing that out. I was told rears may be tatum mid board hubs which look to be 4 piston calipers. I see what they are new but being that they are used I don’t know the worth. Also have a j25 turbo Subaru with looks to be a stinger setup. Harness turbo and inter cooler. Was trying to get info on it. Guy who Owed me money said it was running and fairly new
Last reply by Fullthrottleguy, -
- 0 replies
- 1.4k views
ttt, Shoulder harnesses only, dated 2007 local pick up, or I'll ship you pay cost via Venmo, Zelle, PayPal
Last reply by Roaddog, -
Crow Enterprizes Quick Release Seat Belt 2 Inch Lap Shoulders 5 Point *Partial* Set Incomplete Doesn't contain all parts for installation, comes with both shoulder straps, support strap and everything in the pictures. View all photos. $60 Located in North Phoenix. Thanks for looking! -Scott 623-229-7395
Last reply by BoydCo, -
- 8 replies
- 5k views
What's it worth? This is all I got back from my stolen sandrail. I had intentions of bringing her back to life but, life happened. Fully tabbed Sandbuggy Supply, dual purpose frame, originally setup with a twin turbo Northstar, 2D Medi, bypass shocks all four corners. Missing rear cage. Tanx
Last reply by Ron gray, -
- 0 replies
- 424 views
Looking for 10.75 x 15 front tires For my sandcar. 619-971-7392 ready to buy today!
Last reply by Trevor, -
.
Last reply by Mike E, -
- 2 replies
- 1.1k views
Looking for a set of rims and tires to use on a dyno for the VW bolt pattern that they use on the sandrails, the taller the better. I do have some BFG's I could use but still need rims.
Last reply by BONES, -
- 1 follower
- 1 reply
- 652 views
View Advert McLeod RXT twin disc clutch for sale Used but in good shape, asking $550 for complete set up. These are $1500 new. Will ship on your dime Advertiser SCUMAN Date 07/29/2021 Price $550.00 Category Sandcar / Off-Road parts
Last reply by Squatcher, -
- 5 replies
- 2k views
Hey guys I pulled this LS engine cover off my car it just got re powder coated black, it will not fit with my new intake if anyone can use it come pick it up. will ship on your dime.
Last reply by Indian Joe, -
- 1 reply
- 914 views
I just removed these from my car they work great. I went with HID. 2 lights with ballasts. 100 bucks located in North County SD
Last reply by SANDFORME, -
- 1 reply
- 1.9k views
Sold Sold SOLD Alper Sequential Shifter *** Brand New!! Never mounted or even mocked-up SOLD LazerStar 14'' Light Bars, Work Perfect $125 All items located in Redlands Ca. 92374 (So Cal) Thanks for shopping! 🤑 Paypal Accepted & willing to ship all items . Tim 9o9-233-9o51 (text preferred please)
Last reply by PICKUPYOURTRASH, -
- 2 followers
- 8 replies
- 2.8k views
Selling a set of sand tires and wheels off my sand rail. Rears are 33x17 STU #2 cut paddles mounted on 17x12 Douglas beadlocks with 3 3/4" backspace. Fronts are 10.75x15 mounted on 15x6 1/2 Douglas beadlocks with 3 3/4" backspace. Wheels are powdercoated black. Rear tires are brand new with only 2 trips and fronts are a few years old but in great shape $2700. SALE PENDING I'm in Nor Cal but can have them shipped on a pallet for $100
Last reply by Davyjones, -
- 1 reply
- 1.3k views
Got a brand new Aeromotive A1000 fuel pump only used for mock up, no fuel has been ran through this, going a different route. Asking $325.00 buyer pays shipping.
Last reply by desrodunes1, -
- 3 replies
- 1.1k views
1 pair of silver Eibach 10" x .250 x 150lbs for a 2.0 shock body and 1 pair of silver Eibach 14" x .250 x 250lbs also for a 2.0 shock body. Both pairs have been installed and used for suspension testing only, then removed and put back in boxes. $100 per pair, I can ship on your dime.
Last reply by Greengo, -
- 3 followers
- 15 replies
- 3.3k views
Figured I would start a new tire thread since I can now get all tires cut again. I only sell STU and Sport Tires of America brand tires. A lot of tires are still on back order through STU but if you have any questions on tires, need pricing, or want to get an order in please leave a comment, PM me, or call/text. Make sure you mention GlamisDunes.com to get your GD pricing. -Justin MARS Sand Sports 951-239-2872
Last reply by Mac, -
- 8 replies
- 1.6k views
Like the title says. Looking for some Fox 2.0 16" 350lbs springs. Could also use a set of 12" 250lbs springs for same fox shock. I know I can buy new and don't have an issue with it but thought I would ask here first. I'm in Oceanside. Appreciate it! Thanks!
Last reply by JP DESIGNS, -
Full Set of 17” DWT Wheels w/ OMF bead-locks and 36” STU Paddles and 12.50 Razor Masters
by fastjesse- 0 replies
- 2.4k views
I have a complete set of 17” front and rear DWT billet center wheels with OMF Phaze5 Beadlock Rings and inner reinforcement rings as well. Rear wheels are 12” wide & have 3.75” rear spacing. Tires are Sand Tires Unlimited 12.50x17 Razor Master Fronts and 36x17 Sand Blaster #2’s in the rear. All tires have 2018 date codes. *Sale Pending* Call or Text Jesse 626-488-038three Located in Norco, CA.
Last reply by fastjesse,